MIMAKI UJV500-160 Operation Manual Download Page 172

Page: 172 / 228

4-42

Replacing the air cleaning filter

Replace it once a month.

Pull out the air cleaning filter ASSY located at the upper part of the main body.

• There are 5 air cleaning filter ASSY at the rear surface of the main body (parts indicated with circles in

the figure).

• Hook your finger on the hole in front and pull the air cleaning filter ASSY down to remove.

Removed the used filter.

(1)

Slide the filter holder a little, and remove it.

(2)

Removed the used filter.

• Ink at printing adheres to the air cleaning filter

ASSY. When replacing the filter, it is
recommended to perform the work with a
sheet of paper placed.

Filter

Summary of Contents for UJV500-160





































































































































































































































Search results

Summary of Contents for UJV500-160

Reviews:

Brands by name

Popular brands

MIMAKI UJV500-160, Operation Manual

Search results

Summary of Contents for UJV500-160

Reviews:

Brands by name

Popular brands