MIMAKI UJV500-160, Operation Manual

Page: 58 / 228

2-24
13
Hold the media with the media press gently.
• Set the media so that no media sticks out from the right end
pinch roller to the right side.
• When using a thick media, remove the media press from
the media before printing.
14
Close the front cover.
15
Press the key to select "ROLL" .
• Detects the media width.
• When [MEDIA RESIDUAL] of the machine setup is "ON"
( P.3-25), the screen for entering media remaining amount is displayed after detecting the media
width.( P.2-19)
16
Secure the media on the take-up device.
(1) Feed the media up to the core of the roll media of the
take-up device by pressing
.
(2) Pass the media under the UV shielding cover and the
post cure unit.
(3) As indicated, fix the media on the paper core
with tape so that the printed surface may be
“involuted”.
• Along the paper core, fix the media on several
positions with tape in the order in the figure so
that the media may not wrinkle.
• Surface waviness or ruck may affect the quality of currently printed image.
When fixing media with tape, align the media along the direction indicated with an arrow
in the figure.
• If you pull the media too much when fixing with tape, the media tension may not be
even. And, it may negatively affect the media feeding.
Media press
MED I A SE L ECT
ROL L < > L EA F