2-5
1
2
Basic Operation
s
4
5
6
Setting a Media
This machine can be used with a roll media and leaf media.
For usable medias, refer to P.1-20 “Usable sizes of media”.
Setting the Head Gap
Set the head gap (height from the media to the nozzle plane of the heads).
When the carriage is to move above the platen for printing or maintenance, it moves while keeping the head
gap at the preset value.
The upper limit of the head gap varies with media thickness.
1
Press the
key in LOCAL.
2
Press the
key.
3
Press
to set a value of the head gap.
•
Set value
: 1.5 to 7.0mm
4
Press the
key.
5
Press the
key several times to end the setting.
How to check the value of the head gap
When you check the head gap value currently set, perform the following procedures:
Setting the head gap without
key
You can set the head gap by using the
key in the Local without pressing the
key.
• Although the head gap can be set to a maximum of 7mm, it is usually set to 2mm or less.
When used with 2mm or more, it can cause nozzle clogging by mist scattering and UV leakage light.
Press the
key in Local.
Press the
key several times to display [HEAD GAP].
• The head gap value currently set is displayed.
Press the
key in Local.
Press
to
select
[SETUP], and press the
key.
Press
to select [HEAD GAP], and
press the
key.
• The screen in the Step 2 is displayed.
Perform the procedures from the Step 3.
HEAD GAP
[ ENT ]
HEAD GAP
=
2 . 0mm
HEAD GAP
=
2 . 0mm
SE TUP
HEAD GAP
[ ENT ]
Summary of Contents for UJV500-160
