background image

6

APPLICATIONS

WARNING

Before using any chemicals and/

or solutions, read and follow all 

original manufacturer instructions. Read all 

Safety Data Sheets (SDS) and container labels 

provided with the chemical. Chemicals can cause 

serious bodily injury, property damage, and/or 

damage the tool. Wear personal protective equip

-

ment (PPE) according to the chemical manufac

-

turer's instructions. Always wear eye protection.

Spraying

 

(Cat. No. 49-16-28PS, 49-16-28CS)

  

 

 

1.  Fill the tank and then install onto the base. 

            

2. Put on the backpack and properly adjust the straps. 

3. Turn on the tool.

4. 

Pull the trigger and begin sweeping the nozzle from 

side to side, coating the desired surface evenly in 

accordance with chemical manufacturer's instruc-

tions.

5. If desired, lock-on the trigger for extended use.

6. When done, release the trigger, turn off the tool, 

remove the backpack, drain, and clean the tank.

Supplying Water 

(Cat. No. 49-16-28WS)

1.  

Fill the tank with clean water and then install onto 

the base. 

            

2. Place tool near the job within range of water supply 

hose.

3. 

Attach water supply hose with the quick connect 

fitting.

 Pull on the connection to be certain it is 

properly secured.

3. To start water flow, turn on the tool.

4. Monitor water level in tank. When empty, turn off 

tool, disconnect the hose, and refill tank. Don't run 

tool when tank is empty.

5.  When  done,  turn  off  the  tool,  disconnect  hose, 

drain, and clean the tank.

MAINTENANCE

Maintaining Tool 

Keep your tool, battery pack and charger in good 

repair by adopting a regular maintenance program. 

Inspect your tool for issues such as undue noise, 

misalignment or binding of moving parts, breakage of 

parts, or any other condition that may affect the tool 

operation. Return the tool, battery pack, and charger 

to a MILWAUKEE service facility for repair. After six 

months to one year, depending on use, return the 

tool, battery pack and charger to a MILWAUKEE 

service facility for inspection.

If the tool does not start or operate at full power with 

a fully charged battery pack, clean the contacts on 

the battery pack. If the tool still does not work prop

-

erly, return the tool, charger and battery pack, to a 

MILWAUKEE service facility for repairs.

WARNING

To reduce the risk of personal in-

jury and damage, never immerse 

your tool, battery pack or charger in liquid or 

allow a liquid to flow inside them. Do not use 

bleach as a cleaning agent.

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Some of these include gasoline, 

turpentine, lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia and household deter-

gents containing ammonia. Never use flammable or 

combustible solvents around tools. 

Cleaning Electrical Contacts

Keep electrical contact posts between bottom of tank 

and base clean. 

WARNING! 

Remove battery pack 

from tool before cleaning electrical contacts. Clean 

contacts with a dry, clean cloth only.

Tank                                Base

Contacts

WARNING

To reduce the risk of injury, always 

wear  personal  protective  equip

-

ment (PPE) according to the chemical manufac

-

turer's instructions. Always wear eye protection.

Draining and Cleaning the Tank, Hose, 

and Spray Wand

If there is any liquid left in the tank after spraying, 

the tank should be drained before cleaning. Do not 

store chemicals in the tank. Tank must be cleaned 

before using another liquid. Do not mix liquids. Follow 

the chemical manufacturer’s instructions for proper 

cleaning, storage and/or disposal of excess liquid.

To Drain:

1.  Ensure the battery door is closed securely.

2. Remove the tank from the base.        

3. Empty the tank into a suitable container through 

the  fill  area  or  by  removing  the  drain  cap  and 

filter. 

WARNING! 

Always wear personal protec-

tive equipment (PPE) according to the chemical 

manufacturer's  instructions. Always  wear  eye 

protection.

Summary of Contents for M18 SWITCH TANK 2820-20





















Reviews: