background image

4

FUNCTIONAL DESCRIPTION

ASSEMBLY

WARNING

Recharge only with the charger 

specified for the battery. For spe

-

cific charging instructions, read the operator’s 

manual supplied with your charger and battery.

Removing/Inserting the Battery

To 

remove

 the battery, push in the release buttons 

and pull the battery pack away from the tool.

WARNING

Always remove battery pack before 

changing or removing accessories. 

To 

insert

 the battery, slide the pack into the body 

of the tool. Make sure it latches securely into place.

WARNING

Only use accessories specifically 

recommended for this tool. Others 

may be hazardous.

Connecting the Spray Wand to the Trigger 

Handle

 

(Cat. No. 49-16-28PS, 49-16-28CS)                   

  

 

1.  Insert  the  spray  wand  into  the  trigger

1

2

handle (1) until firmly seated.             

2. Slide the nut onto the threaded coupling 

and hand tighten securely (2).

3. Pull on the spray wand to be certain it is 

properly secured.

4. Place the assembled trigger handle and 

wand into one of the wand storage loca-

tions.

Connecting the Nozzles

 

(Cat. No. 49-16-28PS, 49-16-28CS)  

 

Select and screw on nozzle by job type. When using 

the adjustable nozzle, adjust spray pattern as desired 

by tightening/loosening the nozzle.

Connecting Water Supply or Nozzle

 

(Cat. No. 49-16-28WS)  

To attach water supply hose to the tool or  1

2

nozzle,  push  the  quick  connect  fitting  and 

tool/nozzle together (1). Pull on the connec

-

tion to be certain it is properly secured. To 

remove, pull the collar back to release (2). 

When using the nozzle, adjust spray pattern 

as desired by tightening/loosening the noz

-

zle. 

* 49-16-28WS only

^ 49-16-28PS and

  49-16-28CS only

Cat. No.

49-16-28WS

11. Tank hook receptacle

12. Waist strap

13. Adjustable nozzle ^

14. Nozzle holder

15. Battery compartment

16. Battery compartment latch

17. Tank latch

18. Flow rate dial

19. On/Off switch

20. On/Off light

21. Water nozzle *

22. Adjustable nozzle ^

23. Fan nozzle ^

24. Strainer

25. Tank hooks

26. Gallon markings

27. Liter markings

28. Drain cap

1. Tank 

2. Tank cap

3. Wand storage location

4. Carry handle

5. Spray wand

6.  Trigger lock-on ^

7. Trigger handle ^

8. Trigger lock-off ^

9. Shoulder straps

10. Hose

2

4

7

1

5

10

11

15

16

26

27

25

28

12

13

14

9

3

3

6

8

Cat. No.

49-16-28PS

49-16-28CS

21
22

23

24

19

20

18

17

Summary of Contents for M18 SWITCH TANK 2820-20





















Reviews: