Salt indicator
^
Fill the salt reservoir with dishwasher
salt for reactivation when the
F
Insufficient salt
message
appears. (If it appears during a
programme, wait until the end of the
programme).
^
Confirm with
OK
.
The "Insufficient salt" message will go
out.
After the salt reservoir has been filled,
the "Insufficient salt" message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, confirm again with
OK
.
The salt indicator is deactivated when
the dishwasher has been programmed
to a water hardness level below
0.7 mmol/l (4 °d).
,
Run the
Quick wash
programme
immediately (without any crockery in
the dishwasher, and without
selecting the
Turbo
function) to
remove any traces of salt from the
cabinet.
If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch the indicators off if you wish
(see "Settings
!
- Switching off the
refill indicators").
Ensure that you refill salt and rinse
aid and switch on the refill indicators
again if you are not using
combination products.
Before using for the first time
28
