Miele Standard Operating Instructions Manual Download Page 30

Page: 30 / 96

Add rinse aid only until it is visible in
the opening.

The rinse aid reservoir holds approx.
110 ml.

Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.

Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.

You can adjust the rinse aid dosage
for best results (see Settings

menu - Rinse aid).

Rinse aid indicator

When the

(

Add rinse aid

message

appears, the reservoir contains
sufficient rinse aid for 2 - 3 programmes
only.

Add rinse aid in plenty of time.

Confirm with

The "Add rinse aid" message will go
out.

If you only ever use combination
products containing salt and rinse
aid in your dishwasher, you can
switch the indicators off if you wish
(see "Settings

- Switching off the

refill indicators").

Ensure that you refill salt and rinse
aid and switch on the refill indicators
again if you are not using
combination products.

Before using for the first time

Summary of Contents for Standard

































































































Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands

Miele Standard, Operating Instructions Manual

Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands