Miele Standard Operating Instructions Manual Download Page 85

Page: 85 / 96

Settings menu

for changing standard settings

To open the Settings

menu

Switch the dishwasher on with the On/Off sensor

if it is

switched off.

The programme selection menu will appear in the display.
If the memory function is activated, the menu for the
programme last selected will be displayed instead (see
"Memory"). If this is the case, press the Clear sensor

switch to the main menu.

Main menu

12:00

[

Settings

Sensor wash

Quick wash

40°C

Select

Settings

The display will change to show the Settings

menu.

Settings

12:00

[

Language

Time

Water hardness

Select the option you want to change.

Pressing the

sensor will call up some information about

the programme currently selected.

Sub-menu options which have already been set will have a
tick

(

beside them.

Settings menu

Summary of Contents for Standard

































































































Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands

Miele Standard, Operating Instructions Manual

Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands