– The dishwasher must be
programmed for the water hardness
in your area.
– Where the water hardness fluctuates
e.g. between 1.4 - 3.1 mmol/l
(8 - 17 °d German scale), always
programme the dishwasher to the
higher value (3.1 mmol/l in this
example).
– Your local water authority will be able
to advise you of the water hardness
level in your area.
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness:
mmol/l or °d
The dishwasher is set at the factory for
a hardness level of 0.2 mmol/l (1 °d).
^
Select the water hardness level for
your area, and confirm your selection
with
OK
.
See "Settings - Water hardness" for
further information.
These settings will be saved in memory
after the dishwasher has been through
one complete programme.
Finally, two messages will appear in the
display.
After confirming these messages, the
Add rinse aid
and
Insufficient salt
messages may then appear in the
display to remind you to fill the salt and
rinse aid reservoirs. See relevant
sections on how to do this.
After you have confirmed these
messages with
OK
, the display will
change to show the main menu.
Before using for the first time
23
