Optimise standby
To save energy, the dishwasher
switches off automatically a few
minutes after the last time a button has
been pressed or at the end of a
programme.
The Optimise standby function can be
deactivated if wished. The dishwasher
will then switch off after 6 hours. This
will increase energy consumption.
^
Select the option you want and
confirm with
OK
.
If Optimise standby is switched on,
the clock will appear for just a few
minutes.
If salt or rinse aid needs to be
refilled, or if there is a fault, the
dishwasher will not switch off.
The refill indicators can be switched
off if you use combination products
and the dishwasher is supposed to
switch off despite there being no salt
or rinse aid.
However, a fault message cannot be
switched off.
Refill indicators
If you use combination products and do
not want the refill indicators for salt and
detergent to be displayed, you can
switch off both indicators together. The
DetergentAgent function will not be
affected by this.
^
Select the option you want and
confirm with
OK
.
Ensure that you refill salt and rinse
aid and switch on the refill indicators
again if you are not using
combination products.
Check filters
You can adjust the interval at which the
message to remind you to check the
filters appears.
You can set an interval of between 30
and 60 programme cycles.
The "Check filters" message is set at the
factory to appear after every 50
programme cycles.
^
Select the interval you want and
confirm this with
OK
.
Settings menu
!
88
