Miele Standard Operating Instructions Manual Download Page 44

Page: 44 / 96

Switching on

Make sure the spray arms are not obstructed.

Close the door.

Turn on the tap if it is turned off.

Switch the dishwasher on using the

sensor.

The main menu will appear in the display.
If the memory function is activated, the programme menu for
the programme last selected will be displayed instead (see
Settings menu

- Memory).

Main menu

12:00

[

Sensor wash

Quick wash

40°C

Sensor wash gentle

Selecting a programme

Choose your programme according to the type of load and
how dirty it is.

The different programmes and their uses are described in the

Programme chart

later on in this booklet.

Select the programme you want.

The display will change to show the programme menu.

Sensor wash

01:32:00 h

12:00

[

Extras

Start time

Finish at

13:32

Start

Pressing the

sensor will call up some information about

the programme currently selected.

To select a different programme, touch the Clear sensor

return to the main menu.

Operation

Summary of Contents for Standard

































































































Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands

Miele Standard, Operating Instructions Manual

Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands