Miele Standard Operating Instructions Manual Download Page 91

Page: 91 / 96

System lock

The system lock prevents your dishwasher being used
without your knowledge.

If an attempt is made to switch the dishwasher on when the
system lock is activated,

Appliance locked

will appear in the

display.

The lock must be cancelled before the dishwasher can be
used.

The appliance will lock each time it is switched on while the
system lock is activated.

The dishwasher is delivered with the system lock deactivated.

Select the option you want and confirm with

To cancel the system lock

To unlock the dishwasher, proceed as follows:

Switch the dishwasher on using the

sensor.

The message

Appliance locked

will appear in the display.

Confirm with

[

Deactivate system lock?

Yes

Select

Yes

System lock

Appliance unlocked

The dishwasher is now unlocked and ready for use.

Settings menu

Summary of Contents for Standard

































































































Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands

Miele Standard, Operating Instructions Manual

Search results

Summary of Contents for Standard

Reviews:

Related manuals for Standard

Brands by name

Popular brands