Language
!
The display can be set to appear in one
of several different languages.
You can change the language for the
display via the
Language
!
sub-menu.
^
Select the language you want and
confirm this with
OK
.
The flag after the word
Language
acts as a guide if a language which
you do not understand has already
been set.
If this is the case, keep selecting the
menu option which has a flag after it
until you reach the
Language
!
sub-menu.
Time
You can choose whether the time is to
be displayed and between a 12-hour or
24-hour clock display. You can also set
the time of day from this menu.
If Optimise standby is switched on,
the clock will appear in Standby
mode for just a few minutes. If you
want the time of day always to be
shown, you must switch off Optimise
standby (see Settings - Optimise
standby).
To set the time of day display
^
Select the
Display
option.
^
Select the display you require for the
time of day, and confirm this with
OK
.
To set the clock format
^
Select the
Clock display
option.
^
Select either the 12-hour or 24-hour
option and confirm with
OK
.
To set the time of day
^
Select the
Set the time
option.
^
Set the hours with
+/-
and confirm
with
OK
.
Then set the minutes.
After you have confirmed the minute
entry with
OK
, the display will change
back to the
Time
menu.
^
Press the
U
sensor to return to the
"Settings
!
" menu.
Settings menu
!
86
