Problem solving guide
79
General problems
Problem
Possible cause and remedy
The display is dark.
The dishwasher has switched off automatically to
save energy.
Switch the dishwasher back on using the
sensor.
The interior lighting
doesn't switch on when
the door is opened.
The interior lighting has been switched off
permanently.
Switch the lighting back on again (see "Settings
menu - BrilliantLight").
The following fault
appears in the display:
Salt reservoir lid
During a programme
the warning buzzer will
also sound and the
programme will be
cancelled.
The salt reservoir lid has not been closed properly.
Close the salt reservoir lid.
If the salt reservoir lid has opened during a
programme:
Switch the dishwasher off and back on again with
the
sensor.
Close the salt reservoir lid.
Start the programme again.
Detergent residue is left
in the dispenser at the
end of a programme.
The dispenser was still damp when detergent was
added.
Make sure the dispenser is dry before adding
detergent.
The detergent
dispenser lid cannot be
closed properly.
Clogged detergent residue is blocking the catch.
Clean the detergent from the catch.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
This is caused by the drying system and does not
indicate a fault. The moisture will dissipate after a
while.
Summary of Contents for HG05
