Miele HG05 Operating Instructions Manual Download Page 21

Page: 21 / 116

Before using for the first time

Opening the door

At the end of programmes with a drying
phase (see "Programme chart"), the
door will open automatically a little in
order to help the drying process.
This function can be deactivated if
preferred (see "Settings menu -
AutoOpen").



To open the door, reach under the
door grip and pull.



Open the door fully to disengage the
locking mechanism.

The door locking pins will retract.

If the door is opened during operation,
all functions are automatically
interrupted.



Water in the dishwasher may be

hot. Danger of scalding!
Only open the door during operation
if absolutely necessary and exercise
extreme caution when doing so.



Keep the area around the door

free of obstructions.

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands