Miele HG05 Operating Instructions Manual Download Page 107

Page: 107 / 116

Settings menu

107

System lock

The system lock prevents your
dishwasher being used without your
knowledge.

If an attempt is made to switch the
dishwasher on when the system lock is
activated,

System lock 

will appear in

the display.

The lock must be deactivated before
the dishwasher can be used.

The appliance will lock each time it is
switched on while the system lock is
activated.

The appliance is delivered with the
system lock deactivated.



Select the setting you want and
confirm with

Deactivating the system lock

To unlock the dishwasher, proceed as
follows:



Switch the dishwasher on using the



sensor.

System lock 

will appear in the display.



Confirm with

and keep the sensor

pressed for six seconds.

The dishwasher is now unlocked and
ready for use.

Temperature

The temperature can be displayed in
°C/Celsius or °F/Fahrenheit.

The factory default setting is °C.



Select the option you want and
confirm with

Brightness

There are seven different display
brightness settings.



Select the brightness you want and
confirm this with

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands