Miele HG05, Operating Instructions Manual

Page: 7 / 116

Guide to the appliance
7
Display
General
The display is used to select or set the
following:
– the programme
– any Extras
– the Delay start function
– the Settings  menu
– information
The display can show the following:
– the programme name
– the stage the programme is at
– the current time of day and the date
– the estimated time left for the
programme to run
– the energy and water consumption
(EcoFeedback)
– any relevant fault messages and
information
To save energy, the dishwasher
switches off after a few minutes if you
do not press any sensors during this
time.
To switch the dishwasher back on
again, press the
 sensor.
A dash

in the display next to a sensor
indicates that a function can be
selected with that sensor. The relevant
sensor lights up.
The scroll bar

on the right of the
display indicates that more options or
more text are available which can be
displayed by touching the relevant
illuminated sensor.
A dotted line will appear under the last
option available.
Touch the sensor next to
OK
to confirm
a message or setting and also to move
to the next menu or another menu level.
A tick

will appear beside the option
which is currently selected.
To exit a sub-menu, touch the 
sensor.
If you do not press any of the sensors
for several seconds, the display will
return to the previous menu level. You
may need to enter your settings again.
The
Settings 
menu is used to alter
the dishwasher's electronics to suit
different requirements (see "Settings
menu").