Miele HG05 Operating Instructions Manual Download Page 60

Page: 60 / 116

Programme options

Start at

With the

Start at

function, you set the

exact time at which you want the
programme to start.



Use

+/-

to set the hour and confirm

with

The hour will be saved and the minute
number block will be highlighted.



Use

+/-

to set the minutes and

confirm with

The display will change to show the
programme menu.



Select

to start the programme.

The

Start

indicator will light up.

The programme name and the start
time will then appear in the display.

When the set time is reached, the
programme selected will begin
automatically.

Finish at

With the

Finish at

function, you set the

time at which you wish the programme
to end.



Use

+/-

to set the hour and confirm

with

The hour will be saved and the minute
number block will be highlighted.



Use

+/-

to set the minutes and

confirm with

The display will change to show the
programme menu.



Select

to start the programme.

A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time.

The

Start

indicator will light up.

The programme name and the
estimated start time for the programme
selected will appear in the display.

The selected programme will start
automatically when the estimated start
time is reached.

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands