Miele HG05 Operating Instructions Manual Download Page 100

Page: 100 / 116

Settings menu

100

Changing the electricity tariff times

You can change the start, finish or
priority of an electricity tariff time.



Select an electricity tariff time from
T1-T3 to change.



Select the setting you want to
change.



Use

+/-

to change the setting and

confirm with

The change will be saved.

Deleting the electricity tariff times



You can delete the settings for an
electricity tariff time and in doing so
deactivate the

EcoStart

option for this

time zone.



Select an electricity tariff time from
T1-T3 to delete.



Select

Delete



Confirm the query

Delete tariff T1?

with

Delete

The settings for the electricity tariff time
selected will be reset.



Confirm the message with

The electricity tariff time has now been
deleted.

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands