Miele HG05 Operating Instructions Manual Download Page 106

Page: 106 / 116

Settings menu

106

Change main menu

You can change the order of the
programmes in the programme
selection menu and also enter your
favourite programmes into the first four
programme places.



Select the programmes you want to
place in the first to fourth position of
the programme selection menu.



Confirm each position with

The programmes you have selected will
then appear together in the display.



If you are happy with the order in
which they are shown, confirm with



To change the order in which they are
shown, select

Change

Enter the settings again.

Save extras

Additional programme options can be
added to some programmes, e.g.

Short

(see "Programme options - Extras").

You can use the

Save extras

option to

save settings you have chosen for a
particular programme so that they are
automatically selected when you run
the programme in the future.

The dishwasher is delivered with this
function deactivated.



Select the setting you want and
confirm with

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands