Miele HG05 Operating Instructions Manual Download Page 58

Page: 58 / 116

Programme options

Intensive lower basket

The

Intensive lower basket

Extra

intensifies cleaning performance in the
lower basket in programmes in which
this option is available.

Energy and water consumption are
increased slightly due to the extended
wash duration in the lower basket.

Extra dry

The

Extra dry

Extra improves the drying

performance in programmes in which
this option is available.

Energy consumption is increased due
to an extended fan running time and an
increased final rinse temperature.

Soak

The

Soak

Extra is used for soaking

crockery with dried on soiling.

Energy and water consumption will
increase with this Extra.

If you are using powder dishwasher
detergent, add approx. 5 g to
compartment I.

Pre-wash

The

Pre-wash

Extra can be used for

removing easily soluble soiling from
crockery.

Adding a pre-wash will increase the
programme duration and increase
energy and water consumption levels.

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands