Miele HG05 Operating Instructions Manual Download Page 57

Page: 57 / 116

Programme options

Extras

Extras can be selected for the
programme you have chosen before
starting it.



Switch the dishwasher on using the



sensor.



Select a programme.



Select the

Extras

option.

All available Extras will appear listed in
the display.
Those that can be used with the
programme selected will be indicated
by a dash and an illuminated sensor.



Select the Extras you want.

A tick



will appear beside the Extra to

show that it has been selected.



To cancel the selection of an Extra,
touch the appropriate sensor again.



When you have finished selecting
Extras, confirm with

The display will change back to the
programme menu.
The number of Extras selected, e.g. 1 of
4, will appear in the programme menu.

You can save the selected Extras for the
respective programme (see "Settings
menu - Save Extras").

Short

The

Short

Extra reduces the duration of

the programmes in which this option is
available by up to 30% (see
"Programme chart").
The selection of the

Short

Extra may

take precedence over other selected
Extras.

In order to achieve optimum cleaning
results, energy consumption may
increase slightly with this option.

When used in combination with the

QuickPowerWash

programme, the

Short

Extra results in a wash programme
without drying or automatic opening of
the door.

Energy save

The

Energy save

Extra reduces the

energy consumption of programmes in
which this option is available by up to
20%.

In order to achieve optimum cleaning
results, the programme duration is
extended with this option.

Summary of Contents for HG05





















































































































Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands

Miele HG05, Operating Instructions Manual

Search results

Summary of Contents for HG05

Reviews:

Related manuals for HG05

Brands by name

Popular brands