![background image](http://html.mh-extra.com/html/miele/hg05/hg05_operating-instructions-manual_234900077.webp)
Problem solving guide
77
Water inlet fault
Problem
Possible cause and remedy
The buzzer sounds.
One of the following
fault messages appears
in the display:
Water inlet fault
Please open the stopcock
The tap is turned off.
Turn on the tap fully.
Water intake
Before rectifying the problem, you must:
Switch the dishwasher off using the
sensor.
Water intake is restricted.
Turn on the tap fully and start the programme
again.
Clean the water inlet filter (see "Maintenance").
The water pressure at the intake is lower than 50
kPa (0.5 bar).
Seek professional advice.
The following message
appears in the display
during the
SolarSave
programme:
Intake temp. too low
The intake water has not reached the required
temperature of 45°C (see "Water connection -
Connection to the water supply").
Start the programme again.
If the fault message appears again, select a
different programme.
Summary of Contents for HG05
