What to do if ...
114
Problem
Cause and remedy
Browning is uneven.
The wrong temperature or shelf level was selected.
There will always be a slight unevenness. If the
unevenness is pronounced, check that the correct
temperature and shelf level have been selected.
The material or colour of the baking tin is not suitable
for the oven function.
When using Conventional heat
use matt, dark
coloured pans. Light coloured, shiny pans will not
produce as desirable results.
There is soiling in the
oven after the Pyrolytic
cleaning programme.
The Pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
Remove the ash using warm water with a little
washing-up liquid with a soft sponge or a clean,
damp microfibre cloth.
If coarse soiling remains, run the pyrolytic cleaning
programme again. Select a longer duration if
necessary.
The rack and other
accessories make a
noise when being
pushed into or pulled
out of the oven.
The pyrolytic resistant surface of the side runners
creates friction when accessories are being pushed
into or pulled out of the oven.
To reduce the friction, add a few drops of heat
resistant cooking oil to some kitchen paper and
use this to lubricate the side runners. Do this after
every pyrolytic cleaning programme.
The oven lighting
switches off after a
short time.
The oven lighting is set to switch off after 15 seconds
(default setting). You can change the default setting
for this (see "Settings -
").
