Moisture plus
58
Start the water intake process
The prompt for the water intake process
will appear. Triangle
will flash under
:
Open the door.
Pull the water intake pipe forwards
(located below the control panel on
the left).
Immerse the end of the water intake
pipe in the container with the tap
water.
Confirm with
OK
.
The water intake process will begin.
The amount of water actually drawn up
into the oven may be less than the
amount specified as required, leaving a
small amount in the container.
The water intake process can be
interrupted and restarted at any time
with
OK
.
Remove the water container after the
water intake process.
Close the door.
You will hear the pump briefly as the
remaining water in the water intake pipe
is drawn into the oven.
The current temperature and the
temperature indicator light
will
appear.
°C
You will see the temperature increasing.
A buzzer will sound when the oven
temperature is reached if this option is
selected (see "Settings -
").