Miele G 7314 Operating Instructions Manual Download Page 16

Page: 16 / 124

Warning and Safety instructions

Accessories



Only use original Miele accessories. Using spare parts or

accessories from other manufacturers will invalidate the warranty,
and Miele cannot accept liability.

Transport



Only transport the dishwasher in an upright position so that no

water flows into the electrical controls, as this would cause faults.



If you wish to transport the dishwasher, empty it and securely

fasten all loose parts such as baskets, hoses, and cables.

Disposal of your old dishwasher



Make the door lock inoperative so that children cannot

accidentally shut themselves in. Remove or destroy the locking
bracket of the door lock, and make appropriate arrangements for the
disposal of the appliance.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands