Miele G 7314 Operating Instructions Manual Download Page 108

Page: 108 / 124

Settings

108

You can alter the dishwasher’s
controls to suit changing requirements
by adjusting the settings.

Settings can be altered at any time.

Opening the Settings menu



Switch the dishwasher on with the



sensor if it is switched off.



Touch the



Further programmes/

Settings sensor.

The first of the further programmes will
appear in the display.



Use the



sensors to select the

Settings 

menu option and confirm

with

The first option in the Settings menu will
appear in the display.

For further information about the
display functionality, see “Guide to the
appliance - Display functions”.

Changing settings



Use the



sensors to select the

menu option you want to change and
confirm your selection with

Submenu options that have already
been selected will have a tick



beside them.



Select the setting you want using the



sensors and confirm with



To exit a submenu use the



sensor.

The display will revert to the menu
above.

Closing the Settings menu



Touch the



sensor.

The display will change to the



menu.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands