Miele G 7314 Operating Instructions Manual Download Page 67

Page: 67 / 124

Options

Activating Remote control



You can start your dishwasher remotely
using the Miele@mobile App. To do this,
you first need to install the app on your
mobile device, connect the dishwasher
to your Wi-Fi network (see “Settings -
Miele@home”), and, if applicable,
activate the

Remote control

option (see

“Settings - Remote control”).



Switch the dishwasher on using the



sensor.



Touch the



sensor.

The



sensor will light up.



Switch the dishwasher off with the



sensor.

The dishwasher can now be operated
remotely using the Miele@mobile App.

The Remote control option will remain
activated until you deactivate it again
using the



sensor. The option will also

remain active if you switch the
dishwasher off and back on in the
meantime.

Even if the Remote control option is not
active, you can check the status of your
dishwasher and apply settings using
the Miele@mobile App.

If you start a programme using the

Start

sensor on the dishwasher, the

Remote control option will automatically
be activated for the duration of the
programme and the



sensor will light

up.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands