Miele G 7314 Operating Instructions Manual Download Page 92

Page: 92 / 124

Problem solving guide

Spray arm fault

Problem

Possible cause and remedy

During the programme
and at the end of the
programme, the display
shows the following
message:

Check spray arms

The dishwasher does
not switch off at the end
of the programme.
The crockery may not
be clean because no
detergent was
dispensed. The



AutoDos

function is

automatically
deactivated during the
programme sequence.

The lower spray arm is blocked or the jets of the
lower spray arm are clogged. The



AutoDos

function is automatically deactivated during the
programme because the AutoDos detergent outlet
cannot be completely flushed out.



Switch the dishwasher off and back on again.

Messages appear in the display.



Perform a rotation check of the lower spray arm
and rearrange the crockery if it is blocking the
spray arm.



Clean the lower spray arm (see “Cleaning and care
- Cleaning the spray arms”).



Confirm each message with



Restart the programme.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands