Miele G 7314 Operating Instructions Manual Download Page 13 | Manualshive

Page: 13 / 124

background image

Warning and Safety instructions

13



This dishwasher is supplied with a special lamp (depending on the

model) to cope with particular conditions (e.g. temperature,
moisture, chemical resistance, abrasion resistance, and vibration).
This special lamp must only be used for the purpose for which it is
intended. It is not suitable for room lighting. Replacement lamps may
only be installed by a Miele authorised technician.



In areas which may be subject to infestation by cockroaches or

other vermin, pay particular attention to keeping the appliance and
its surroundings in a clean condition at all times. Any damage which
may be caused by cockroaches or other vermin will not be covered
by the warranty.

Correct installation



The dishwasher must be installed and connected in accordance

with the installation instructions and the supplied installation plan.



Be careful before and while installing the dishwasher.

Some metal parts pose a risk of injury/cutting. Wear
protective gloves.



The dishwasher must be correctly aligned horizontally to ensure

trouble-free operation.



In order to ensure stability, built-under and integrated dishwashers

must only be installed under a continuous countertop which is
secured to adjacent cabinetry.



The dishwasher must only be built into a tall unit if additional

safety precautions are taken. In order to safely install the appliance
in a tall unit, please use the "Tall unit installation kit" and observe the
installation plan provided. Otherwise there is the danger of the unit
tipping over.

«
...
11
12
13
14
15
...
»

Summary of Contents for G 7314





























































































































Reviews:

No comments

Related manuals for G 7314

Brand: Washtech Pages: 40

CSOW 4963TWCE-80

Brand: Candy Pages: 32

Brand: Indesit Pages: 24

DISHDRAWER DD24SHI9

Brand: Fisher & Paykel Pages: 22

Brand: Scandomestic Pages: 86

Brand: IKEA Pages: 68

Brand: Grundig Pages: 116

Brand: Smeg Pages: 30

Brand: Fagor Pages: 115

Brand: Atag Pages: 44

Brand: Swissh Pages: 12

Brand: CaterChef Pages: 44

Brand: NEFF Pages: 56

Brand: Samsung Pages: 36

Brand: Samsung Pages: 45

Brand: Samsung Pages: 44

Brand: Samsung Pages: 80

Brand: Samsung Pages: 72

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands