Miele G 7314 Operating Instructions Manual Download Page 109

Page: 109 / 124

Settings

109

Language



The display can be set to appear in one
of several different languages.

You can change the language used in
the display and also the country via the

Language 

submenu.

The flag after the word

Language 

serves as a guide if a language that
you do not understand has been set.
In this case keep selecting the menu
option that has a flag after it until you
reach the

Language 

submenu.

Time of day

The current time of day must be set
before you can use the timer option.

Setting the clock format

You can select either a 24-hour or 12-
hour clock.



Select the

Clock format

menu option.



Select the setting you want and
confirm with

Setting the time of day

You can set the current time.



Select the

Set

menu option.



Use the



sensors to enter the

hour and confirm your entry with

Then set the minutes and confirm
with

The time of day has now been saved.

If connection is established to a Wi-Fi
network, the time of day is set
automatically.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands