Miele G 7314, Operating Instructions Manual

Page: 25 / 124

Using for the first time
25
Setting the time of day
The time is updated automatically if a
connection is established to the Wi-Fi
network.
The display will then change to the
screen for setting the time.
The current time of day must be set
before you can use the timer option.
 Use the  sensors to enter the
hour and confirm your entry with OK .

Then set the minutes and confirm
with
OK .
Keeping the relevant

or

sensor
pressed will increase or decrease the
time automatically.
Setting the water hardness
The display will change to the screen
for setting the water hardness.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7 mmol/l (10 -
15 °dH - German scale), always
programme the dishwasher to the
higher value (2.7 mmol/l or 15 °dH in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________ mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
0.36 mmol/l (2 °dH - German scale).
 Set the water hardness level in your
area and confirm with
OK .
See “Settings - Water hardness” for
more information.