Miele G 7314 Operating Instructions Manual Download Page 74 | Manualshive

Page: 74 / 124

background image

Cleaning and care

74

Check the condition of your
dishwasher regularly (approx. every
4–6 months). This way, faults and
problems can be avoided.



Damage caused by unsuitable

cleaning agents.
All surfaces of this appliance are
susceptible to scratching. Contact
with unsuitable cleaning agents can
alter or discolour all surfaces.
Only use cleaning agents formulated
for use on the relevant surfaces.

Cleaning the wash cabinet

The wash cabinet is largely self-
cleaning, provided that the correct
amount of detergent is always used.

The frequent use of low-temperature
wash programmes (< 50 °C) increases
the risk of contamination and odours
inside the wash cabinet. Run the

Intensive 75 °C

programme once a

month to clean the wash cabinet and
prevent odours from developing.

However, if residues such as limescale
or grease have been deposited, use the

Maintenance prog.

programme to clean

the dishwasher (see “Programme chart
–



Further programmes”) with

dishwasher cleaner (see “Optional
accessories – Appliance care”). Follow
the instructions on the product
packaging.
Miele cleaning and care products are
available to order from a Miele
Experience Centre or the Miele online
shop.



Clean the filters in the wash cabinet
regularly.

Cleaning the door and the door
seal

The door seal and the sides of the
dishwasher door are not accessed and
cleaned by the spray arm jets. As a
result, mould can develop here.



Wipe the door seals regularly with a
damp cloth to remove food deposits.



Wipe off any food or drink residues
which may have dripped onto the
sides of the dishwasher door before
closing it.

«
...
72
73
74
75
76
...
»

Summary of Contents for G 7314





























































































































Reviews:

No comments

Related manuals for G 7314

Brand: Daewoo Pages: 33

Brand: Colged Pages: 112

Brand: Zanussi Electrolux Pages: 28

Brand: Majestic Appliances Pages: 29

Brand: Smeg Pages: 36

Brand: Hotpoint Ariston Pages: 48

Brand: Hotpoint Pages: 16

Brand: Hamach Pages: 55

Brand: Mach Pages: 41

Brand: Omega Pages: 31

Brand: Insinger Pages: 104

Brand: Vivax Pages: 172

Brand: Progress Pages: 64

Brand: Samsung Pages: 80

Brand: Zanussi Pages: 36

Brand: FAR Pages: 105

Brand: Haier Pages: 12

Brand: Haier Pages: 18

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands