Miele G 7314 Operating Instructions Manual Download Page 24

Page: 24 / 124

Using for the first time

Standard settings

Switching on the dishwasher



Switch the dishwasher on using the



sensor.

The welcome screen will appear when
the dishwasher is switched on and the
welcome melody will sound.

For further information about the
display functionality, see “Guide to the
appliance - Display functions”.

Setting the language

The display will change automatically to
the screen for setting the language.



Select the language and the country,
if applicable, using the



sensors,

and confirm with

For further information on setting the
language, see “Settings - Language”.

A tick



will appear next to the

language that has been set.

Setting up Miele@home

The message

Set up Miele@home

will

appear in the display.



To set up Miele@home now, confirm
by touching

Useful tip:

To postpone setup until

later, select the option

Skip

and confirm

with

There are two ways of connecting your
dishwasher to your Wi-Fi network:



Select the connection method you
want and confirm your selection with

Connect using App

Connect using WPS

You will then be guided by the display
and the Miele@mobile App.

For further information on
Miele@home, see “Settings -
Miele@home”.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands