Miele G 7314 Operating Instructions Manual Download Page 76

Page: 76 / 124

Cleaning and care

Cleaning the AutoDos

You should check that the detergent
chute is clean every time you replace
the PowerDisk, and clean it if
necessary. This helps keep the
AutoDos working properly.

In order to ensure that the AutoDos
works at its best, check it each time
you replace the PowerDisk and clean
it if needed.

PowerDisk holder

Detergent chute for dispensing the

detergent from the PowerDisk into the
wash cabinet



Slide the yellow catch of the AutoDos
lid to



and open the lid.



Remove the PowerDisk if applicable.



Pull the PowerDisk holder upwards
by the yellow tabs and remove it.
When doing so, do not pull on the
side tab.



Use the tab (see arrow)



to release

the detergent chute and pull it out



Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands