Miele G 7314 Operating Instructions Manual Download Page 95

Page: 95 / 124

Problem solving guide

Unsatisfactory cleaning result

Problem

Possible cause and remedy

The dishes are not
clean.

The items were not loaded correctly.



See notes under “Loading the dishwasher”.

The programme was not thorough enough.



Select a more intensive programme (see
“Programme chart”).

Not enough detergent was dispensed during manual
detergent dispensing.



Use more detergent, or change your detergent.

Items are blocking the path of the spray arms.



Carry out a rotation check and if needed rearrange
the items so that the spray arms can rotate freely.

The filter combination in the base of the wash
cabinet is not clean or not correctly fitted.
This may have caused the spray arm jets to become
blocked.



Clean and/or fit the filter combination correctly.



Clean the spray arm jets if necessary (see
“Cleaning and care - Cleaning the spray arms”).

There are smears on
glassware and cutlery.
There is a bluish sheen
on the surface of
glassware. The film can
be wiped off.

The rinse aid dosage is set too high.



Reduce the dosage (see “Settings - Rinse aid”).

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands