Miele G 7314 Operating Instructions Manual Download Page 117

Page: 117 / 124

Settings

117

Setting the electricity tariff times

Before you can use the

EcoStart

option,

you must set at least one electricity
tariff time.



Use the



sensors to select an

electricity tariff time T1 to T3 and
confirm with

The start of the electricity tariff time
selected will appear in the display and
the hour number block will be
highlighted.



Use the



sensors to set the hour

and minutes for the start time and
confirm both with

The end of the electricity tariff time
selected will appear in the display and
the hour number block will be
highlighted.



Use the



sensors to set the hour

and minutes for the finish time and
confirm both with

The electricity tariff time will be saved
and its priority will appear in the display.



Use the



sensors to set the

priority you want and confirm with



Confirm the message with

The electricity tariff time will be
activated.

Changing the electricity tariff times

You can change the start, finish, or
priority of an electricity tariff time.



Use the



sensors to select an

electricity tariff time T1 to T3 that you
wish to change and confirm with



Select the setting you want to change
and confirm with



Use the



sensors to change the

setting and confirm with



Confirm the message with

The change will be saved.

Summary of Contents for G 7314





























































































































Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands

Miele G 7314, Operating Instructions Manual

Search results

Summary of Contents for G 7314

Reviews:

Related manuals for G 7314

Brands by name

Popular brands