Miele G 6910 Operating Instructions Manual Download Page 73

Page: 73 / 96

Frequently Asked Questions

Problem

Possible cause and solution

The buzzer sounds.

One of the following

fault messages appears

in the display:

Before fixing the fault:



Turn the dishwasher off using the



sensor but‐

ton.



Technical fault FXX

There may be a technical fault.
After a few seconds:



Turn the dishwasher back on.



Select the desired program.



Press the

Start

sensor button.

If the error message is displayed again, there is a

technical fault.



Contact Miele Service.



Waterproof fault

The WaterProof System has reacted.



Turn off the water supply.



Contact Miele Service.



Technical fault F78

A fault has occurred in the circulation pump.



Turn the dishwasher off for at least 30 seconds

with the



sensor button.



Turn the dishwasher back on.



Select the desired program.



Press the

Start

sensor button.

If the error message is displayed again, there is a

technical fault.



Contact Miele Service.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands