Miele G 6910 Operating Instructions Manual Download Page 76

Page: 76 / 96

Frequently Asked Questions

General problems

Problem

Possible cause and solution

This display is dark.

The dishwasher has switched off automatically to

save energy.



Turn the dishwasher on again using the



sensor

button.

The interior lighting

does not switch on

when the door is

opened.

The interior lighting has been switched off.



Switch the lighting back on again (see "Settings

menu - BrilliantLight").

Detergent residue is left

in the dispenser at the

end of a program.

The dispenser was still damp when detergent was

added.



Make sure the dispenser is dry before adding de‐

tergent.

The dispenser cover

cannot be closed.

Detergent residue is blocking the latch.



Remove the detergent residue.

The inside of the door

and/or the interior walls

are wet after a program

has finished.

This is caused by the drying system and does not in‐

dicate a fault. The moisture will dissipate after a

while.

Water remains in the

wash cabinet at the end

of a program.

Before fixing the fault:



Turn the dishwasher off using the



sensor but‐

ton.

The filter system in the wash cabinet is clogged.



Clean the filter system (see "Cleaning and care -

Filter system").

The drain pump or non-return valve is blocked.



Clean the drain pump or the non-return valve (see

"Frequently asked questions").

The drain hose is kinked.



Remove the kink.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands