Miele G 6910 Operating Instructions Manual Download Page 87

Page: 87 / 96

Electrical connection

Hardwired electrical connection

It is possible to hardwire this appliance

to an existing power cable.

CAUTION: Before servicing, discon‐

nect the power supply by either re‐

moving the fuse, shutting off the

power main or manually "tripping"

the circuit breaker.
Installation work and repairs should

only be performed by a qualified

technician in accordance with all ap‐

plicable codes and standards. Re‐

pairs and service by unqualified per‐

sons could be dangerous and the

manufacturer cannot be held re‐

sponsible.
Before connecting the appliance to

the power supply, make sure that the

voltage and frequency listed on the

data plate correspond with the

household electrical supply. This da‐

ta must correspond to prevent ma‐

chine damage. Consult an electrician

if in doubt.

GROUNDING INSTRUCTIONS

THIS APPLIANCE MUST BE

GROUNDED.

This appliance must be connected to a

grounded metal, permanent wiring sys‐

tem, or an equipment-grounding con‐

ductor must be run with the circuit con‐

ductors and connected to the equip‐

ment-grounding terminal or lead on the

appliance.

Prior to making a hardwire connec‐

tion to the terminal, remove the pow‐

ercord. Otherwise there will be a risk

of electric shock from the attached

plug.

An existing flexible supply cord or cable

shall have a minimum thickness of

AWG 14.

120 V, 60 Hz, 15 A fuse rating

Black wire (live): connect to L

White wire (neutral): connect to N

Green wire (ground): connect to



After attaching the permanent power

supply cord, check that all screws on

the terminal block and the strain re‐

lief are tightened.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands