Guide to the dishwasher
16
Display functions
General information
The display is used to select or set the
following:
– The program
– Any options
– The Delay Start function
– The
Settings
menu
– The display of information
The display can show the following:
– The program name
– The program stage
– The current time of day and the date
– The estimated time left for the pro‐
gram to run
– Any relevant fault messages and in‐
formation
To save energy, the dishwasher turns
off after a few minutes if you do not
press any buttons during this time.
To switch the dishwasher back on
again, press the
button.
A dash
in the display next to a sensor
button indicates that a function can be
selected with that sensor button. The
relevant sensor button lights up.
The scroll bar
on the right of the dis‐
play indicates that more options or
more text are available which can be
displayed by touching the relevant illu‐
minated sensor button.
A dotted line will appear under the last
option available.
Touch the sensor button next to
OK
to
confirm a message or setting and also
to move to the next menu or another
menu level.
A check
will appear beside the op‐
tion which is currently selected.
To exit a sub-menu, touch the
sen‐
sor button (Back).
If you do not press any of the sensor
buttons for several seconds, the display
will return to the previous menu level.
You may need to enter your settings
again.
The
Settings
menu is to adapt the
electronic module of the dishwasher
to changing requirements (see "Set‐
tings menu").
