background image

Operation

42

Detergent

Only use detergents formulated

for domestic dishwashers.

Refer to the manufacturer's packaging

as to whether Tab products are suitable

for the water hardness level in your

area. 

Please note that the cleaning and dry‐

ing results of Tab detergents can vary

greatly.

For optimum cleaning and drying re‐

sults, use Miele dishwasher detergent

and add Miele salt and Miele rinse aid

separately. See "Optional accesso‐

ries."

Detergent dosage

Follow the dosage recommended by

the manufacturer on the packaging.

Unless directed otherwise, use one

detergent tab or add 1 1/4 - 2 table‐

spoons (20 - 30 ml) detergent to

compartment II, depending on the

level of soiling. With very heavy soil‐

ing you can also add a small amount

of detergent to compartment l.

Tabs may not dissolve completely

when the Express program (if availa‐

ble) is used.

Use only the recommended amount

of detergent. Continued use of too

much detergent may cause machine

damage.

Dishwasher detergents can

cause burning in the nose, mouth,

and throat if swallowed, or inhibit

breathing.
Avoid inhaling or swallowing dish‐

washer detergent. Keep children

away from detergent. Keep deter‐

gent out of the reach of children.

Keep children away from the dish‐

washer when the door is open. There

could still be detergent residues in

the dishwasher. Only add detergent

just before starting the program and

lock the door with the child safety

lock (depending on model).

Summary of Contents for G 6910

































































































Reviews: