Miele G 6910 Operating Instructions Manual Download Page 55

Page: 55 / 96

Program overview

Program

When to use

Program sequence

Pre-

wash

Main

wash

Interim

rinse

Final

rinse

Drying

Economy

Water and energy saving

program for standard dish‐

ware soiling that has not

dried on, with a long soak‐

ing time and a low temper‐

ature.

Clean

Machine

Special cleaning program

to remove grease deposits

from the dishwasher.

Tall Items

For extra large, heat resist‐

ant items, e.g. large vases.

Remove upper basket.

Grates and

filters

Wash program for cleaning

Miele grates, the Miele

griddle plate, and Miele

range hood filters.

Glasses -

No Rinse

Aid

To wash glassware without

detergent and rinse aid;

rinse cycle with warm wa‐

ter.

Energy

Saver

The water intake tempera‐

ture must be 115°F (45°C)

for light to normally soiled

dishware.

Sensor‐

Wash

Program for dried-on re‐

mains and non-sensitive

loads. Temperature, water

in-take, program duration

and electricity consump‐

tion are automatically ad‐

justed to suit the level of

soiling of the dishware.

If re‐

quired

Consumption: The consumption values refer to a hot-water connection.

Electric power: 0.01 - 1.5 kWh

Water: 1.1 - 7.1 gal. (4 - 27 l)

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands