Miele G 6910 Operating Instructions Manual Download Page 53

Page: 53 / 96

Options

EcoStart

The

EcoStart

function allows you to take

advantage of time variable economy

rates of electricity. Before you can use

this option, you must set up to three

electricity rate time zones (see "Settings

menu - EcoStart").

You then set the latest time at which the

program selected should end.

The dishwasher will start automatically

in the cheapest rate zone within the

time set.



Use

+/-

to set the hour and confirm

with

The hour will be saved and the minute

number block will be highlighted.



Use

+/-

to set the minutes and con‐

firm with

The display will switch to the program

menu.



Confirm with

Start

to start the pro‐

gram.

The estimated start time for the pro‐

gram selected will appear in the display.

The

Start

indicator light will light up to

confirm that the program has started.
The selected program will start auto‐

matically during the most cost effective

time zone. It will finish at the latest by

the set finish time.

Changing or deleting set times

You can change the set times or the

program before the start time in the dis‐

play is reached.



Select the

Change

option.

The display will switch to the program

menu.



Select the

Start at

Finish at

, or

EcoStart

function.



To change the set time, select the de‐

sired time with

+/-

and confirm with



To delete the set time, select the

Re-

set

option and confirm the reset time

with

The display will switch to the program

menu.

If you open and close the door again

before the start time is reached, the

message

Press Start to continue

will ap‐

pear in the display. Press the

Start

sensor button to restart the delay

start.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands