Miele G 6910 Operating Instructions Manual Download Page 18

Page: 18 / 96

Before using for the first time

Opening the door

At the end of programs with a drying

phase (see "Program overview"), the

door will open automatically a little in

order to help the drying process.

This function can be deactivated if pre‐

ferred (see "Settings menu -

AutoOpen").



To open the door, reach under the

door grip and pull.



Open the door fully to disengage the

locking mechanism.

The door locking pin then retracts.
If the door is opened during operation,

all functions are automatically interrupt‐

ed.



Water in the dishwasher may be

hot. Danger of scalding!
Only open the door during operation

if absolutely necessary and exercise

extreme caution when doing so.



Keep the area around the door

free of obstructions.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands