Options
51
Delay Start with EcoStart
There are three ways of delaying the
start of a program. You can set the start
time or the finish time of a program.
You also have the option of taking ad‐
vantage of time variable economy rates
of electricity using the
EcoStart
function.
When using the Delay Start function,
make sure that the detergent com‐
partment is dry before adding deter‐
gent. Wipe dry with a cloth if neces‐
sary. If the compartment is wet,
powder detergent can become lum‐
py and stick to the dispenser, with
the result that it is not fully dis‐
pensed.
Do not use liquid detergent when se‐
lecting Delay Start, as it can run into
the dishwasher before it is required.
To prevent children coming into
contact with dishwasher detergent:
Add the detergent
immediately be‐
fore
starting the program, i.e., before
activating delay start with
OK
. Then
lock the door with the safety lock.
Turn the dishwasher on using the
sensor button.
Select the program you want from
the main menu.
Select the
Delay Start
option from the
program menu for the selected pro‐
gram.
You then have a choice of
Start at
,
Finish
at
, and
EcoStart
.
Select the function you want.
Now enter the required time.
If, while you are setting the time, you do
not press any sensor buttons for sever‐
al seconds, the display will revert to the
previous menu. You will then have to
enter your settings again.
If you keep the
+
or
-
sensor button
pressed, the value shown will automati‐
cally increase or decrease.
If the time of day display has been
turned off (see "Settings menu -
Time") the display will go out after a
period of 10 minutes.
To switch the display back on for a
few minutes, press the
sensor but‐
ton.
