Miele G 6910 Operating Instructions Manual Download Page 44

Page: 44 / 96

Operation

Turning on



Make sure the spray arms are not ob‐

structed.



Close the door.



Turn on the water supply if it is turned

off.



Turn the dishwasher on using the



sensor button.

The program menu of the last selected

program will appear in the display.

Selecting a program

Choose your program according to the

type of load and the degree of soiling.
The different programs and their uses

are described in the

Program Over‐

view

chapter.



Use the selection sensor buttons to

select the program you want.

The display will switch to the program

menu.

Tap the



sensor button to call up

more information about the program

currently selected.

You can now select Options for your

program (see "Options").
To select a different program, tap the



sensor button to return to the main

menu.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands