Miele G 6910 Operating Instructions Manual Download Page 56

Page: 56 / 96

Settings menu

Adjusting default values
Opening the Settings menu



Turn the dishwasher on with the



sensor button if it is turned off.

The main menu will appear in the dis‐

play.

If the memory function is activated, the

program menu for the program last se‐

lected will be displayed instead (see

"Settings menu - Memory"). If this is the

case, use the



sensor button to get to

the main menu.

To learn about the display, read the

section with the same name.



Select the

Settings 

option.

The display will switch to the

Settings 

menu.



Select the option you want to

change.

Press the



sensor button to see more

information about the program cur‐

rently selected.

Sub-menu options which have already

been selected will have a check



be‐

side them.



To exit a sub-menu again, use the



sensor button.

The display will revert to the menu

above.

Language



The display can be set to appear in one

of several different languages.
You can change the language in the

display via the

Language 

sub-menu.



Select the language you want and

confirm this with

Some languages also have a country

option to select.



If so, select the appropriate country

and confirm your selection with

The flag after the word

Language 

acts as a guide if a language which

you do not understand has already

been set.

If this is the case, keep selecting the

option which has a flag after it until

you reach the

Language 

sub-menu.

Summary of Contents for G 6910

































































































Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands

Miele G 6910, Operating Instructions Manual

Search results

Summary of Contents for G 6910

Reviews:

Related manuals for G 6910

Brands by name

Popular brands