background image

Installation instructions

Washing machine
One-family household

1014123-R03

31/10/2017

1014123-R03

1

For Service and Spare Part Information please contact: V-ZUG AUSTRALIA Pty. Ltd. Tel +61 7 3209 6822

The appliance should be installed by qualified personnel only.
Each step must be carried out and checked in full in the order specified.

Validity

These installation instructions apply to the models: 

L

 (

11010), S (11011), SL (11012), SLQ (11013), SLQ WP (11014)

Identification plate

1

Open the drain tray below the appliance door (see «1. Opening
the appliance door»)

Identification plate 

1

Transport

If the weight of the appliance is greater than your lifting capacity, the appliance must be transported by several
people or using a transport aid. The weight of the appliance is given on the appliance packaging and in the operating
instructions.

Transport the appliance in an upright position only! Transporting it in any other position will cause damage. When
carried carefully without being shaken, the appliance may be tilted a maximum of 90° to the right (viewed from the
front).

Applicable only to model SLQ WP:

In the event that the appliance is tilted during transportation or installation it must not be put into operation for 2
hours.

Installation accessories supplied

The necessary installation accessories are located in the washing drum and in the appliance packaging.

Designation

Article no.

Number

See installation step

Installation set, incl.:

Rubber stopper

Screw material

External drain hose

Wire hose clamp

Hose support

W41152

1

2

2. Removing the transport lock

1

4. Positioning the installation plate

1

5. Plumbing in

1

5. Plumbing in

1

5. Plumbing in

Installation plate (incl. double-sided 
adhesive tape)

W40653

1

4. Positioning the installation plate

Summary of Contents for Adora L








Reviews: