Miele G 6510 Operating Instructions Manual Download Page 61

Page: 61 / 104

Programme options

EcoStart

The

EcoStart

function allows you to take

advantage of time variable economy

rates of electricity. Before you can use

this option, you must set up to three

electricity tariff time zones (see "Set‐

tings - EcoStart").

You then set the latest time at which the

programme selected should end.

The dishwasher will start automatically

in the cheapest tariff zone within the

time set.



Use the



arrow buttons to set the

hour and confirm with

The hours will be saved and the minute

number block will be highlighted.



Use the



arrow buttons to set the

minutes and confirm with

The estimated start time of the pro‐

gramme selected will appear in the dis‐

play.

The



and

Start

indicator lights will

light up.
The programme selected will start auto‐

matically in the cheapest time zone and

will finish at the latest at the finish time

set.

The time remaining will appear in the

display, the



indicator light will go out

and the indicator light for the pro‐

gramme selected will light up.

Changing or deleting set times

You can change the set times or the

programme before the start time in the

display is reached.



Press the



button.



Use the



arrow buttons to select

the setting you want to change and

confirm with



Use the



arrow buttons to select

the

Change

Delete

function and

confirm with

After confirming the

Change

function,

you can change the set time.
After confirming the

Delete

function, the

programme duration will appear in the

display and the programme will start.

The



indicator light will go out and the

Start

indicator light will light up.

Summary of Contents for G 6510









































































































Search results

Summary of Contents for G 6510

Reviews:

Related manuals for G 6510

Brands by name

Popular brands

Miele G 6510, Operating Instructions Manual

Search results

Summary of Contents for G 6510

Reviews:

Related manuals for G 6510

Brands by name

Popular brands